Homepage Knowledge base Articles

Why doesn't the lighting work? 5 reasons

LED Applications Do it yourself House and apartment

Why doesn't the lighting work? 5 reasons

Here we go again. You've checked the fuses, made sure there is no power cut notice yet the lamp still refuses to light up? Do you know this from everyday life? And do you know what the reasons might be that the lighting is not working properly? Keep reading.

Why doesn't the lighting work? 5 reasons - 1

"It suddenly went out." Problem? Light bulb

The light suddenly went out and you don't know what to do? And it keeps happening regularly? Check the light bulb. Its quality really does matter. After unplugging the luminaire, turning off the switch or powering off the fuses, remove the bulb and invest in a new model. When shopping, pay attention to the following factors:
- thread/shank type,
- manufacturer (go for the well-known ones, not the cheap ones),
- warranty (up to 5 years),
- power and brightness,
- light colour,

You can choose, for example, fluorescent lamps or LEDs. Choose a well-known, preferably Polish manufacturer. Check the warranty duration before purchasing. Typically lighting products come with a two-year warranty, as this is required of manufacturers by law. Therefore, find out about the post-warranty service, maybe in the event of problems you will be able to contact the complaints service directly.

After replacing the bulb, make sure that it is securely seated and the shade is stable. Lighting will only work faultlessly if all its parts are in the right place. 

"It glows but kind of weird". Problem? Sloppy execution of the luminaire

The lighting seemingly works, but it's far from perfect? Check the kind and type of luminaire. Some may simply be faulty. Therefore, it is worth checking the most important aspects (e.g.  replaceable or non-replaceable light sources) already when purchasing the lighting. 

Downlight luminaires (ceiling-mounted and shining downward) with an integrated light source (e.g. Kanlux AREL LED), have better durability and tightness than those with replaceable bulbs. Choose the safety of lighting provided by a non-replaceable source in a hermetic luminaire (e.g. Kanlux ASTTEN LED). The range may not be as wide, but you can be more confident about the reliability of the light.


"It keeps blinking" Problem? Connector

What should you do when you notice that there is something wrong with the light? Check the connector. Are there any signs of overheating or rust on it? Or do you hear the distinctive "buzzing" at the luminaire? Is the wire connected firmly? This problem can also be caused by blown fuses - you will recognise them by the heat generated. 

A blinking light can also be caused by a line surge. This in turn leads to the fuse being switched off. If the situation persists, it may be necessary to replace the entire installation or even the energy connection to the building. If you are not familiar with it, be sure to ask for professional help. 

Don't create black scenarios straight away – more often than not, it is simply a problem with the connection of the luminaire to the installation, or one of the wires has slipped out of the connector, but more about that in the next paragraph.


"The light dims at times" Problem? Wires

Does it seem like the light is dimming and you don't know if it's your fatigue or if there really is something wrong? Check the wires in the connection block. It's possible that they haven't been screwed down properly. If they can't be gently tightened – think about replacing the whole luminaire. It's best to replace it with one with so-called quick couplings. Especially if the problem occurs in the bathroom, as quick couplings are more resistant to humid conditions.

Another possibility is that you still have old-type bulbs in your flat, which take a while to shine with maximum intensity. Does it bother you? Change your light sources to LEDs. In this type of solution, the full light flux is visible as soon as it is switched on. It also has other advantages such as safety, energy efficiency, durability, performance and reliability.

Remember!

Never underestimate a fault. If you don't have sufficient electrical knowledge – call in a professional.


"A new LED but the light keeps changing" Problem? Manufacturer 

If you notice changing light intensity in luminaires with an LED source, which are connected via a power supply unit (12V), check whether the power supply device is imported. It is possible that low-quality products have not passed the necessary safety tests. 

Don't underestimate the choice of a power supply unit. It is worth investing in tested and approved devices (e.g. Kanlux BRAVO LED) that are equipped with three types of protection (short-circuit, overload and surge). 
If you want the lighting to be even more reliable, choose kits that include all the elements: a light source, a power supply unit, and a switch. You can use a configurator – for example for LED strips – such a configurator will help you to select the right power supply units for the chosen lighting.

"Lighting should be manufactured in accordance with relevant regulations, properly tested and inspected before it is placed on the market. Luminaire designers must have a thorough knowledge of lighting technology and be proficient in the field of broadly understood electrical engineering. The manufacturer should ensure quality tests and certificates so that only verified and properly functioning products reach our homes," says Dominik Sitko, Product Manager at Kanlux.
Dominik Sitko Kanlux Product Manager


Remember to always choose light sources and luminaires whose quality is confirmed by tests, experience and, preferably, a five-year manufacturer's warranty. Kanlux has its own Kanlux Laboratory which carries out reliable product research. The brand has state-of-the-art measuring equipment and qualified engineers with many years of experience. Therefore, the products available on the market are of the highest quality.


Lighting failure can have various causes, such as a burnt-out bulb, damaged bulb holder, or control panel fault (if you use a SMART system in your home). Whatever the cause, it should not be underestimated and should be eliminated before it does any more damage.

 

 

Other articles

How does LED lighting work?

The LED lighting in our homes, offices and public areas is here to stay. Today, it is hard to imagine...

Tests Applications LED Outdoor lighting House and apartment Trendy
How can lighting create a spa atmosphere in your bathroom?

When designing a bathroom, not only aesthetics but also lighting matter—when selected appropriately,...

Lighting fixtures Tests Applications LED House and apartment Do it yourself Trendy
Ceiling lighting: pendant, ceiling-mounted, or spotlight – which one to choose?

Ceiling lighting is not only a matter of aesthetics – it is a crucial element that influences both...

Lighting fixtures Tests Applications Do it yourself House and apartment Trendy Colour temperature
Guide: How to choose light bulbs for different spaces?

Appropriate lighting is one of the most important elements of interior design, yet it is often underrated....

Lighting fixtures Tests Applications LED Do it yourself House and apartment Trendy Colour temperature
IP Rating - how to choose lighting for the bathroom, surroundings, house facade and garden?

What is an IP Rating? How to choose appropriate lighting for the bathroom, garden, or house facade? Discover...

Lighting fixtures LED Outdoor lighting Do it yourself House and apartment Trendy Colour temperature
5 mistakes you should not make when choosing balcony lightning

Your balcony can become a magical, relaxing space or extension of your home during the warm months, provided...

Lighting fixtures LED Outdoor lighting House and apartment Trendy Colour temperature
How can we help?
*- required

Information about processing personal data (GDPR)

The Controller of your personal data is Kanlux S.A. with its registered office in Radzionków (41-922) at ul. Objazdowa 1-3, (“the Controller”).

1. Contact details of the Controller: ado@kanlux.pl.
2. Personal data are processed for the purpose of fulfilling the Controllers legitimate interest in the execution of the agreement, asserting claims related to the business activity conducted and - in the case of voluntarily granted consent - conducting direct marketing of its own products or services
3. Personal data will be stored in the IT environment, which means that data may also be temporarily stored and processed, e.g. in back-up copies, as part of tests of IT systems or procedures aimed at detecting irregularities or protecting against fraud or attacks, in order to ensure the security and proper functioning of IT systems.
4. The recipients of the data will be entities supporting the Controller in the scope of IT services, transport services and subsidiaries and affiliates of Kanlux S.A. and its permanent commercial representatives having their registered offices in the territory of a Member State of the European Union, as well as lawyers and auditors.
5. The Controller does not intend to transfer the data to a third country or an international organisation.
6. Personal data will be kept for the duration of the agreement, and after its termination - for the period required for the performance of accounting or tax duties (for their duration) and the period necessary for the expiration or limitation of any claims arising from the agreement, and in the case of consent to the processing of personal data for marketing purposes - until the withdrawal of consent.
7. You have the right to:
a) Demand access to data;
b) Demand that your data be rectified if they have been incorrectly saved or if they have changed;
c) Demand the removal of data if the legal basis for their processing no longer applies;
d) Demand the limitation of the processing if, in your opinion, they are incorrect (for a period enabling the Controller to check the accuracy of the data) or pending the processing of your objection, or if the Controller no longer needs the personal data but you need them in order to establish, pursue or defend your claims;
e) Raise objections to the processing of personal data if they are no longer necessary for the purposes of the legitimate interests pursued by the Controller;
f) File a complaint with the supervisory authority if you believe that the processing of personal data violates the law.;
8. The provision of data related to the implementation of the agreement is voluntary but necessary for the purpose of the implementation of the agreement. Providing data for marketing purposes is voluntary.
9. No automated decisions, including through profiling, are taken based on your personal data.
10. Once the processing of your personal data for the original purpose has been completed, the data will not be processed for any other purpose.

Show more ▾